Markup vs margin: what’s the difference in construction?
The same dollars, measured two ways. Mix them up, and every job you price comes in short.
Markup and margin both describe the money you add on top of what a job costs you. They’re worked out from different numbers, so the same job gives two different percentages.
Mix them up, and you can price every job for less than you meant to without noticing, until the year-end numbers come in.
What markup and margin mean
Markup is what you add, as a percentage of your cost. Margin is the same amount, as a percentage of the price.
| Your cost | $1,000.00 |
|---|---|
| What you add on top | $250.00 |
| Price to the client | $1,250.00 |
| Markup: $250 ÷ $1,000 cost | 25% |
| Margin: $250 ÷ $1,250 price | 20% |
The same $250, two numbers. The margin is always the smaller one, because the price is always bigger than the cost.
In this guide, margin means the job’s gross margin: the price less the job’s cost. Your overhead comes out of it, and what’s left after that is your profit.
Your numbers on a change order. A 15% markup on $1,650.00 is a 13.0% margin on the $1,897.50 price.
How to convert markup to margin, and back
There’s nothing to memorize. Two short sums do it:
- Markup to margin: divide the markup by 1 plus the markup. A 25% markup is 0.25 ÷ 1.25, a 20% margin.
- Margin to markup: divide the margin by 1 minus the margin. A 20% margin is 0.20 ÷ 0.80, a 25% markup.
To price a job for the margin you want, divide your cost by 1 minus that margin. Multiplying your cost by 1 plus the margin gives you that percentage as a markup instead, and a lower price.
| Your cost | $40,000.00 |
|---|---|
| Price: $40,000 ÷ 0.80 | $50,000.00 |
| Gross profit: $50,000 less $40,000 | $10,000.00 |
| Margin: $10,000 ÷ $50,000 | 20% |
| Markup: $10,000 ÷ $40,000 | 25% |
The 20% margin you wanted takes a 25% markup to reach.
Why pricing at the wrong one loses money
Say your overhead and profit need 20 cents of every dollar that comes in. That’s a 20% margin. Price at a 20% markup instead, and every job comes in short.
| Your cost | $40,000.00 |
|---|---|
| Priced at a 20% markup | $48,000.00 |
| The margin that gives: $8,000 ÷ $48,000 | about 16.7% |
| Priced for a 20% margin | $50,000.00 |
| Short on this one job | $2,000.00 |
Across $1,000,000 of job costs in a year, the same mix-up is $50,000 you meant to earn and never billed.
Discounts work the same way, only faster. Take 10% off that $50,000 price, and the $10,000 you were making drops to $5,000. A 10% discount cut your gross profit in half.
So before you agree to a discount, work out what it does to your margin, not just to the price.
The mix-up runs the other way too. If you price at a 25% markup and your accountant reports a 20% gross margin, the jobs came in just as you priced them. Nothing went missing.
Markup and margin, side by side
The common figures, rounded to one decimal:
| 10% markup | 9.1% margin |
|---|---|
| 15% markup | 13.0% margin |
| 20% markup | 16.7% margin |
| 25% markup | 20.0% margin |
| 30% markup | 23.1% margin |
| 33.3% markup | 25.0% margin |
| 40% markup | 28.6% margin |
| 50% markup | 33.3% margin |
| 100% markup | 50.0% margin |
| 10% margin | 11.1% markup |
|---|---|
| 15% margin | 17.6% markup |
| 20% margin | 25.0% markup |
| 25% margin | 33.3% markup |
| 30% margin | 42.9% markup |
| 35% margin | 53.8% markup |
| 40% margin | 66.7% markup |
| 50% margin | 100.0% markup |
The gap grows as the numbers get bigger. At 10% the two are close. At a 50% markup, the margin is only 33.3%.
Which one should you use?
Use both, each for its own job. Set your target as a margin, because overhead and profit are shares of what comes in. Then price with the markup that gets you there.
- Find your overhead as a share of revenue. Your year-end statements show it. Say it’s 15%.
- Add the profit you want. Say 5%. Together that’s a 20% margin.
- Convert it to a markup. A 20% margin is a 25% markup on cost.
- Use that one markup everywhere: on estimates, extras and invoices. Tell everyone who prices work which number it is.
When someone says “we work on 20%,” ask which one they mean. Two estimators in the same office can mean two different things.
Some contractors carry a lower markup on subcontractor work than on their own crew’s. If you do, check the margin on the whole job, not line by line. That’s the number that pays the office.
Read the contract’s markup clause
Some contracts set the markup allowed on changes, or cap overhead and profit on cost-plus work. Check whether the clause means a percentage of cost or of the price before you price the first change.
How CrewLog does it
CrewLog puts the margin beside the markup wherever you price work. On a quote, the markup box says “A 25% markup is a 20% margin.” A change order shows your cost, your markup and the margin.
Invoices show the markup with its margin too, and your invoice settings show the margin your default markup gives.
A quote with no markup, or a margin under 10%, is flagged before you send it. The client only ever sees the price, never your cost or your markup.
Once the crew logs hours on a change order, it shows its real margin: the price less what the work actually cost.
Quotes and invoices are on every plan, from $39 a month. Change orders and the time clock are on Crew at $89 a month and Pro at $179. Compare the plans.
More on quotes, change orders and invoices on the features page.